The under discussion occupational health safety and environmental document "Installation of Energy Management Panel" is in an editable and ready-to-use format. just click on the download link given at the end of these points. QHSEDOCS is a totally free source of health and safety documents downloads:
Hazards
- Faults with installation
- Loss of power during connection
Consequences:
- Operatives - Contact with exposed conductors or overheating
- Other sites/project users-Due to lack of and or insufficient possible lighting to work areas/whilst operating equipment, device, or machinery.
- Operatives - Loss of lighting/power to enable installation safely and without any damage.
Control Measures
- Turn off utility power at the distribution point where the EMP is to be connected. Be sure there is no power.
- All installations tested dead (for insulation and resistance) with a multi-function tester before being made live.
- All temporary and new installations conform to IEEE Regulations.
- Arrange with the Client/Principal Contractor times to isolate the supply, and to connect initial/additional circuits to the EMP.
- Ensure the Client/PC has communicated to all other workers.
- Complete the connection outside normal site hours whenever possible.
- Adequate lighting is provided around the EMP installation area and suitable temporary power to enable the safe installation of equipment.
DOWNLOAD THE FILE HERE 👇
0 Comments